Product Description
Model:SG8330
Product Name: Laser Scanner Galvo
Material of outer holder: Aluminum Alloy
Color Of Outer holder: Sliver and Blue
Product Size: 183x215x158mm
Gross Weight (without wire and power supply): 8.8kg
Package Size: 36*34*31cm
Function & Application: Common marking, rotary marking, flying marking and other applications.
Product Advantages:
1.Drives with advanced detection ability of position and speed.
2.SG8330 is accurate load design for 30mm mirrors.
3.It has the characteristics of zero drift, higher speed, lower temperature and easy installation, etc
Parameter Details:
Motor Specification of galvanometer drivers:
Working Temperature | 0-45°C |
Linearity | 99.9% |
Setting Time | ≤1.2ms |
Scale Drift | 40PPM/°C |
Zero Drift | <15μRad./°C |
Long-term Drift Over 8 Hours | <0.5mRad |
RMS Current | 4.0A |
Peak Current | 25A(Max) |
Maximum Scan Angle | ±15° |
Storage Temperature | -10 to +60°C |
Resolution | 12μrad |
Repeatability | 8μrad |
Input Aperture | 30.0mm |
Beam Displacement | 35.5mm |
Motor Weight | 750g |
Frequency | ≤400Hz |
Servo Driver Board Specification of galvanometer drivers:
Input Voltage MAX.RMS | ±24VDC |
Interface Signals Digital | XY2-100 |
Position Signal Input Resistance | 1K±1% Ω |
Position Signal Input Scale Factor | 0.33V/° |
Position Signal Output Scale Factor | 0.33V/° |
Working Temperature | 0-45°C |
Dimension(L×W×H) | 80×54×33mm |
FAQ:
Q：How can I self-check?
Before starting up the whole system, please check carefully to confirm whether there is any problems, such as: plug virtual connection or without connection, two mirrors touched with each other, drive board signal input errors, etc. Only after finishing all checking, then you can turn on the power supply.
Application:
Hot Tags: large volume scanner, China, suppliers, manufacturers, customized, low price, application of
