The price of 3D dynamic marking machine has always been high, the reason is because the price of 3D dynamic galvanometer is relatively expensive. Why is 3D dynamic galvanometer expensive? Some time ago, when talking about 3D dynamic galvanometer, a Z-axis is added on the basis of the two-dimensional XY galvanometer. This axis drives a focusing mirror to move the position and adjust the focal length by moving the position. So look at it, in fact, 3D dynamic galvanometer is not very complicated, that is, the galvanometer has a set of marking cards, one to dynamic marking software, one Z-axis with one lens, one linear motor, the outer casing is bigger than two-dimensional.
But now these dynamic galvanometers on the market, when playing 3D products, need to import the 3D graphics of the marked object before they can be marked, not the complete dynamic galvanometer, the real dynamic galvanometer It should be any object, placed under the galvanometer, and immediately scanned by a 3D scanner.The scanned object 3D data will be transmitted to the computer in real time----marking software, start the marking software, and you can directly Three-dimensional object marking. So look at this, if you want to do a galvanometer 3D dynamic galvanometer, then you must embed a 3D scanner into the galvanometer, the two are combined, but through the understanding of the market 3D dynamic scanner, the general 3D dynamic scanners are very expensive, and they are still relatively cheap between 80,000 and 300,000 yuan. If this is the case, then the cost of such a dynamic galvanometer is between 90,000 and 320,000 yuan. The price is not ours. The industry can afford it.
However, it is possible to change the thinking and galvanometer laser industry. Generally, the shape of the products that each company needs to printed is generally fixed. Even if it changes, it will only have dozens of pictures in a year. If several companies in the laser industry buy a 3D scanner to provide 3D scanning services in the industry, these companies will inevitably make the price of scanning services reasonable through competitive services. For enterprises that need product marking machines, send the products that need to be marked to the above companies for scanning, get 3D pictures, and import this picture into the dynamic galvanometer software, we can solve all the problems.
