A lot of customers buy laser marking machine, are taking a fancy to the laser marking machine engraving speed and efficiency, because speed = efficiency = money, but the laser marking machine has been used for a long time, it is inevitable that laser marking machine marking speed will occur slow down.Many friends must know that the marking speed of the laser marking machine is freely adjustable, but there are still many people who are in contact with the laser marking machine for the first time don’t know this.Today Sino-Galvo will tell you how to adjust the marking speed of laser marking machine.
In general, the main reasons affecting the speed of laser marking machines are: hardware and software.
For hardware that affects itself is the configuration of the laser marking machine itself.
Why the laser marking machine configuration will affect the marking speed？One is the laser. The higher the power, the faster the laser marking speed, the more expensive it is.
The second is other accessories, such as f-theta lens and galvanometer scanners. The superiority of its own products will affect the laser frequency, laser spot pattern and the speed of light divergence laser power.
Therefore, if you want to improve the marking speed of the laser marking machine through rich configuration, these should have been thought of before buying. Increasing the laser power can directly improve the speed of laser marking.The performance of the relevant accessories must withstand the increased power efficiency. Therefore, it is sometimes necessary to temporarily replace the accessories, but the cost, workload and technical requirements will also increase.
In conclusion, it is not worth advocating to improve the marking speed of the laser marking machine on the hardware. We can only improve the speed through software debugging.
Sino-Galvo Tech. specializes in optical galvanometer scanner and its control system’s R&D, production and sales. We not only provide Industrial Galvo Scanner,Dynamic Focusing System,3D Galvo Scanner System,Laser Cleaning System,Medical Galvo Scanning Syetem,but also a range of Control System,Laser Accessories such as F-theta Lens, Laser Source and so on.
If you are interested, please contact with us directly for further communication.
In the next article we will introduce another reason that affects the speed of marking: software. Please stay tuned for us!
