1, good cooling is the maintenance of laser scanning vibration mirror an effective way, so in the installation of professional laser scanning vibration mirror, we should pay attention not to the inlet and outlet from the case too close, to set aside a certain space to allow air circulation, in addition, inside the chassis should be installed cooling fan, and in the ambient temperature rise when the use of air-conditioning cooling, To ensure that the laser vibration mirror in the operation of good heat dissipation, so as to avoid high fever on the equipment adversely affected.
2, the daily maintenance should pay attention to clean laser scanning vibration mirror dust, and regular use of air gun will be laser vibration mirror in the dust blown out of the air, but also to clean the dust on the Ark of the cabinet, to prevent the laser scanning vibration mirror of the dust plug and affect the equipment cooling.
3, if the laser scanning mirror lens has stolen goods need to clean up, because the human body exhaled gas contains oil and water, will further pollute the lens, so do not use the mouth directly to blow, but should use the ear-washing ball to blow lenses, until the surface of the lens without particles. Then use a dedicated cotton swab dipped in laboratory grade acetone, ethanol to gently wipe. If the use of wiping paper, then to wipe the mirror paper folded into small squares sandwiched between the four fingers will be wet, and then follow the laser scanning vibration lens coating lines gently wipe the direction.
