Product Description
Model: JS1105HG
Product Name:Medical Laser Scanning System
Material of outer holder: Aluminum Alloy
Color Of Outer holder: White&Blue
Product Size: 238*60mm
Gross Weight (Including laser control system): 250g
Package Size: 32x41x15cm
Function & Application
Fractional mode for face or body, it can remove wrinkle, scar, patch, acne, acne mark, stretch marks.
Private mode for vaginal tightening.
Pulse mode for minimally invasive surgery.
Product Advantages
1. Scanner beam input aperture is for 3-7 mm, the mirrors can be changed depending on the types of laser source, compatible with different types of laser source.
2. The beam input interface is available for both of laser arms and the fiber lasers.
3. Square, circle, triangle, Hexagon, straight line and other graphics are optional for scanning mode, the size of Axis X and Y can be adjustable separately.
4. With friendly software interface, multi-language supporting, parameter memory function.
Parameter Details
Motor Specification
Working Temperature | 0-45°C |
Linearity | 99.9% |
Setting Time | ≤0.35ms |
Scale Drift | 40PPM/°C |
Zero Drift | <15μRad./°C |
Long-term Drift Over 8 Hours | <0.5mRad |
RMS Current | 2.0A |
Peak Current | 10A(Max) |
Maximum Scan Angle | ±11° |
Storage Temperature | -10 to +60°C |
Resolution | 12μrad |
Repeatability | 8μrad |
Input Aperture | 5.0-7.0mm |
Motor Weight | 13.0g |
Servo Driver Board Specification
Input Voltage MAX.RMS | ±15VDC |
Interface Signals Analog | ±5V |
Fault signal output(TTL level) | H is for galvanometer working normally, L for galvanometer failure |
Analog Signal Input Resistance | 10KΩ ±1% |
Working Temperature | 0-45°C |
Dimension(L×W×H) | 75×50 ×28mm |
Special Notice：
1. Before starting up this system, please carefully check whether the wiring polarity and sequence of each component is correct or not, otherwise the galvanometer scanner can not work normally or even damage.
2. The scanner and two drive boards need to be connected according to the corresponding serial numbers, can not be interchangeable, otherwise there will be self-excited phenomenon.
3. When scanner system works or in the process of turns on & off, please do not aim the scanner beam output mouth at any anybody.
4. This system is mainly used for medical and beauty CO2 laser fractional system, please ensure good temperature, humidity and quiet using environment.
5. Please do not adjust the board potentiometer and other hardware configuration without authorization, do not disassemble motors and other components.
Hot Tags: medical laser scanning system, China, suppliers, manufacturers, customized, low price, application of
