1. JS1105 laser beauty galvanometer Application introduction
Our JS1105 designed to deliver precise and effective treatments for various cosmetic procedures, addressing common skin concerns such as:
- Hair removal: Targeting hair follicles with laser energy to inhibit hair growth.
- Skin rejuvenation: Stimulating collagen production and improving skin texture and tone.
- Tattoo removal: Breaking down tattoo ink particles for gradual fading and removal.
- Pigmentation correction: Targeting melanin deposits to reduce the appearance of hyperpigmentation and uneven skin tone.
- Scar reduction: Resurfacing scar tissue and promoting skin regeneration for smoother texture.
2. JS1105'S Key features and Parameters
This system was introduced the most advanced galvanometer technology and drive control mode in the world, we developed and designed the fractional laser control system intensively. It has the following features and performance:
- The scanner hand-piece designing was adopted smaller size, light weight, especially suitable for ergonomic design hand-held laser system.
- It was equipped with 2 high-performance mini motors, adopted the imported optical sensors to ensure high scanning speed and good stability.
- With fault self-checking function, reliable error signal output can fully ensure the high security of the scanner.
- With friendly software interface, parameter memory function. With several preset operation modes, modular design, easy to operate. Square, circle, triangle, Hexagon and other graphics are optional for scanning mode, the size of Axis X and Axis Y can be adjustable separately.
- The software can accurately set the point spacing, dwell time, and interval time to effectively control the energy, and the laser power and indicator brightness can be calibrated;
- Standardized cables connection interface, easy to connect with control system, and also we can provide customers with specially designed control system.
| Motor Specification | |
| Working Temperature | 0-45℃ |
| Linearity | 99.90% |
| Setting Time | ≤0.35ms |
| Scale Drift | 40PPM/℃ |
| Zero Drift | <15μRad./℃ |
| Long-term Drift Over 8 Hours | <0.5mRad |
| RMS Current | 2.0A |
| Peak Current | 10A |
| Scan Angle | ±11° |
| Storage Temperature | -10 to +60℃ |
| Resolution | 12μrad |
| Repeatability | 8μrad |
| Input Aperture | 5.0-7.0mm |
| Beam Displacement | 10.7mm |
| Motor Weight | 13g |
| Servo Driver Board Specification | |
| Input Voltage(MAX.RMS) | ±15VDC |
| Interface Signals(Analog) | ±5V |
| Fault signal output(CMOS level) | H for galvo working normally L for galvo working failure |
| Analog Signal Input Resistance | 10KΩ±1% |
| Working Temperature | 25℃±10℃ |
| Dimension(L×W×H) | 75×50×28mm |
3. JS1105 laser beauty galvo scanner's advantages
Our JS1105 galvanometer is equipped with a 1105 mini motor, which is lightweight and easy for beauticians to operate. It has two modes: fractional laser and pulse laser. It has variety of advantages as follows:
- Precision targeting for enhanced treatment results, reduced treatment times due to high-speed scanning capabilities;
- Enhanced patient comfort and safety features, the galvanometer has its own safety protection settings, and the fault signal is a CMOS signal, which is very convenient for the control board of the medical beauty system to obtain. Once a galvanometer failure occurs, the laser can be immediately controlled to stop the laser output, avoiding medical accidents caused by excessive laser action on the skin due to galvanometer failure, and greatly improving the safety and reliability of laser medical beauty equipment;
- The software operation interface is simple, with parameter memory function, preset a variety of treatment modes, easy to operate; The software can accurately set the point spacing, residence time, and interval time, so as to effectively control the energy, and the laser power and indicator brightness can be calibrated. If you have any special needs, you can also communicate with us to customize.
4. Company product qualification
Our products have obtained CE, ROHS, REACH, IATF 16949 and other qualification certificates, as follows:
If you are interested in our products, please contact us through "Send Inquiry" below. Thank you!
Hot Tags: js1105 co2 fractional laser beauty galvanometer, China, suppliers, manufacturers, customized, low price, application of
