Product Description
Model: JS1505
Product Name: Handpiece for Beauty Machine
Material of outer holder: Aluminum Alloy
Color of Outer holder: Sliver
Gross Weight (Including wire and power supply): 3.6kg
Package Size: 32cmx41cmx15cm
Function & Application: Beauty application
Product Advantages
The scanning motors is one of the most core components of scanners, we has introduced the most advanced international photoelectric sensor control mode, and carried on the comprehensive optimization design from the scanner mechanical aspects, greatly reduced the scanner size, improved the marking speed and precision, the products performance and stability has reached the leading level at home and abroad.
This galvo scanner has rapid response speed, good precision and stability, suits for 3D printing and medical beauty high-precision instruments application.
Parameter Details
Motor Specification
Working Temperature | 0-45°C |
Linearity | 99.9% |
Setting Time | ≤0.4ms |
Scale Drift | 40PPM/°C |
Zero Drift | <15μRad./°C |
Long-term Drift Over 8 Hours | <0.5mRad |
RMS Current | 2.5A |
Peak Current | 10A |
Maximum Scan Angle | ±15° |
Storage Temperature | -10 to +60°C |
Resolution | 12μrad |
Repeatability | 8μrad |
Input Aperture | 5.0-7.0mm |
Beam Displacement | 10.7mm |
Motor Weight | 38.0g |
Frequency | ≤800HzServe Driver Board Specification |
Servo Driver Board Specification
Input Voltage MAX.RMS | ±15VDC |
Interface Signals Analog | ±5V |
Analog Signal Input Resistance | 200K±1% Ω |
Position Signal Input Resistance | 1K±1% Ω |
Position Signal Input Scale Factor | 0.5V/° |
Position Signal Output Scale Factor | 0.5V/° |
Working Temperature | 0-45°C |
Dimension(L×W×H) | 80×54×33mm |
FAQ:
What is the special notice during using the galvo scanner?
1. Before starting up this system, please carefully check whether the wiring polarity and sequence of each component is correct or not, otherwise the galvanometer scanner can not work normally or even damage.
2. The scanner and two drive boards need to be connected according to the corresponding serial numbers, can not be interchangeable, otherwise there will be self-excited phenomenon.
3. When scanner system works or in the process of turns on & off, please do not aim the scanner beam output mouth at any anybody.
Hot Tags: laser hair removel handpiece, China, suppliers, manufacturers, customized, low price, application of
