Laser marking machine installation environment requirements
According to the specification requirements, since the output of the laser changes with temperature, it must be used at a suitable temperature of 15℃-28℃, and a humidity of 20%~80%.
The installation environment of the laser marking machine is as follows:
1. The laser marking machine needs to be stored in a non-condensation environment with a temperature ranging from 0°C to 50°C and a relative humidity ranging from 10% to 90%.
2. Avoid placing the laser marking machine in places with sudden temperature changes, condensation, direct sunlight, or dusty places.
3. The laser marking machine is prohibited from being placed in the following places: places with shock or severe vibration, unstable and tilted places, close to walls with poor ventilation, close to water, oil, steam, chemicals, corrosive gases, flammable Places with gas, iron powder, and dust, places where static electricity, noise, and magnetism may be generated, and places that may be contaminated by foreign matter such as metal or wood chips. These will have varying degrees of impact on the equipment, easily leading to a decrease in output and even potential safety hazards.
4. Appropriate ventilation space is required around the laser head and controller. Do not block the exhaust port when exhausting, and provide enough space around the equipment to properly discharge the heat generated by the equipment.
5. If the laser marking machine generates dust during operation, external ventilation devices should be provided to prevent dust from accumulating around the device.
6. The yellow optical fiber cable contains a very thin laser transmission fiber. Please do not bend it or reduce it to a radius of 150 mm or less. It is very easy to break and affect the laser performance.
Laser marking machine assembly precautions
Laser marking machine is a high-precision and high-efficiency marking equipment that is widely used in various industries. As a laser equipment practitioner, assembling a laser marking machine is an essential skill.
When assembling a laser marking machine, common questions include: how to install the laser correctly, how to adjust the mirrors, how to install the control board, etc., as follows:
1. Install the laser
The laser is the core component of the laser marking machine. When installing, you need to pay attention to the following points:
Choosing a suitable laser should generally be based on the type, thickness and color of the marking material;
When installing the laser, ensure there is sufficient distance between the laser and the machine base to avoid the laser beam being reflected by the base and damaging the laser;
When installing the laser, pay attention to the positive and negative poles of the laser to avoid damage to the laser due to reverse connection.
2. Adjust the galvanometer mirror
The galvanometer is the transmission medium for the laser beam. Adjusting the position and angle of the galvo mirrors and f-theta lens can affect the quality and smoothness of the laser beam. When adjusting the galvo mirrors and lens, you need to pay attention to the following points:
the installation should start from the laser, next install the galvo scanne, and then go to the workbench;
the galvanometer should be in the center of the optical path to ensure the quality of the laser beam;
The angle adjustment of the mirrors should be adjusted horizontally first and then vertically.
3. Install the control board
The control board is the brain of the laser marking machine. You need to pay attention to the following points during installation:
- Before installing the control board, you should first confirm whether the control model and parameters match the laser marking machine;
- When installing the control board, pay attention to the correctness of the wiring and avoid reverse or wrong connections;
- After installing the control board, it should be tested to ensure that all functions are normal.
Summarize
Assembling a laser marking machine requires certain skills and knowledge. Correct operating methods and precautions can avoid problems and ensure the normal use of the machine. During the assembly process, attention needs to be paid to the installation and adjustment of the laser, galvanometer and control board, as well as the connection of the power supply.
We Sino-Galvo is a high-tech galvo scanner manufactory, has been specialized in R&D, production and sales of galvanometers for 22 years. We can provide you with accessories for assembling the complete machine (such as galvanometers, field lens, control boards, lasers), and at the same time provide you with customized services (according to the needs of your end customers' diverse needs).
To choose a reliable laser partner, choose sino-galvo. Welcome to contact us through the "send inquiry" below to discuss cooperation matters.
