Product Description
MC1603 High Speed Galvanometer Scanner motors are introduced from America, has the advantages of small size, high speed & high precision, good stability, etc. With stable performance combined with industrial camera system, its real-time displayed high definition working interface can be enlarged via computer or other visual equipment, which can reduce the operator’s visual fatigue; this has positive promotion for laser marking application on areas are invisible or are difficult to be observed by naked eye.
MC1603 Technical Parameters
Speed | ||
Marking Speed(1) | 4000mm/s | |
Positioning Speed(1) | 4000mm/s | |
Writing Speed(2) | 301cps | |
Step Response Time(1% of full scale) | 370us | |
Step Response Time(10% of full scale) | 630us | |
Tracking Error Time | ≤202us | |
Precision and Error | ||
Linearity | 99.9% | |
Repeatability (RMS) | ＜8μRad | |
Gain Error | ＜5mRad | |
Zero Offset | ＜5mRad | |
Long-term Drift Over 8 Hours | ＜0.5mRad | |
Scale Drift | ＜40PPM/℃ | |
Zero Drift | ＜15μRad./℃ | |
Mirror Damage Threshold | ||
K9 Mirror | 9.1J/cm^2 | |
Silicone Mirror | 10J/cm^2 | |
Wavelength(3) | 10600nm/1064nm/355nm | |
Power and Signal | ||
Input Voltage | ±15VDC | |
RMS Current | 2A | |
Interface Signal | Digital | XY2-100 |
Analog | ±5V | |
Peak Current | 8A | |
Position Signal Input Resistance | 10KΩ±1% | |
Machinery Scan Angle(4) | ±15° | |
Working Current, Temperature, Dimension | ||
Working Temperature | 0℃--45℃ | |
Storage Temperature | -10℃--60℃ | |
Aperture | 10mm | |
Galvanometer Scanner Dimension (LxWxH) | 134×96.5×121.9mm | |
Galvanometer Scanner Weight | ≈0.9Kg | |
Note: The above data are tested after 30 min warm-up
(1) With F-theta objective, F=160mm, marking 2mm height single character
(2) With F-theta objective, F=160mm, marking 1mm height single character per second
(3) Special wavelength coating film can be customized
(4) If any special requirement, customization is available.
The advantages are as following:
■ The whole system adopting the Optimization Designing of electromagnetic compatibility, with high signal-to-noise ratio and strong anti-interference ability.
■ Smaller scanner size, which meets the increasing industrial demands of higher precision and more compact systems. 7mm~10mm beam input aperture and also the mirror covering a variety of wavelength range.
■ MC1603 scan head can be integrated into different application systems easily. The housing is very strong and dustproof. Thus it can be used in the extremely bad environment.
If you have any questions, please contact our Technical s Department:
consulting hot-line: 400-055-8805
Hot Tags: Galvanometer Scanner with Monitoring System, China, suppliers, manufacturers, customized, low price, application of
