1. Vibration Mirror System Factory has been debugged by professionals, users must not be arbitrarily adjusted.
2. The serial number of the scan head and the driving plate must be the same, otherwise it will produce self-excited, resonant and heating problems, resulting in the system can not work properly, or even damage the vibration mirror system.
3. In the absence of matching radiator, please do not run the vibration mirror system, or the vibration mirror system will be caused by the rapid heat and permanent damage.
4. The input power of the drive plate polarity must not be reversed, otherwise it will completely damage the vibration mirror system.
5. In the installation process, care should be taken to protect lenses from contamination.
6. As the driver board and scanning head have a large number of chips, so in the installation process, must pay attention to electrostatic protection, lest damage the chip.
